ZX8530 LCR Digital Meter 50hz-100khz 34 points measurable

ZX8530 LCR Digital Meter 50hz-100khz 34 points measurable.These series component tester above are the new generation impedance tester in China which use 320*240 Color LCD,it can fit all test requirement of component and material with its 0.05% basic accuracy and 50Hz ~ 100kHz frequency. It can test low ESR capacitor and high Q inductor and also be applied in analyze of the electrical performance in microphone,oscillator, inductor, ceramic capacitor, LCD, variode, transformer.etc.
These series component tester are powerful tools for electrical component design,inspection, QC and manufacture. It can be more suitable for point inspector, curve analyze of frequency response of piezoelectric component .etc in auto production line with its high test speed. Its variable impedance-outputting mode can fit to different standards. With its excellent performance , These series can realize the different tests of commercial and military standards as IEC and MIL.

Performance characteristics

  • High comparability with LCR Digital Meter test data of international brand manufacturers (keysight, wk)
  • Keyboard locking function, power-off data protection function
  • List scanning function, open circuit, short circuit and load correction function
  • Simplified Chinese and English operating languages
  • Save test data and test conditions (USB flash drive or internal)
  • Test voltage and current automatic balance adjustment function (ALC)
  • There are 50 groups of test files in the instrument and 500 groups of test files in the USB flash drive, which can be called at any time
  • The U disk can support FAT16 and FAT32 file systems
  • 4.3 "LCD, 2U standard case
  • Upload data to the computer without installing software

ZX8530

Performance introduction

1.The test data of LCR Digital Meter are highly comparable with those of international brands, including keysight and wk.
2.They haveIt has a 4.3 "LCD screen and a 2U standard chassis;
3.It has a keyboard locking function and a power-off data protection function;
4.It has two languages, namely simplified Chinese and English operating languages; it is easy to operate;
5.Save the test data and test conditions to the U disk or inside;
6.The formats supported by the U disk include FAT1 and FAT32 file systems;
7.List scanning function, open circuit, short circuit and load correction Function;
8.upload data to the computer without installing software;
9.There are 50 groups of test files in the instrument and 500 groups of test files in the USB flash drive, which can be called at any time;
10.Test voltage and current automatic balance adjustment function.

The operation steps are as follows

1: plug in the power plug and press the panel switch to on. After starting up, the function of the instrument will be indicated in the last set state. Preheat for 10 minutes. After the balance is reached in the standby state, carry out the normal test
2:For test parameter selection, use the 'parameter' key to select L, C and R, and the unit is as follows: l: Uh, MH and H (secondary parameter: Q value of the device under joint test) C: PF, NF and UF (secondary parameter: Joint Test)D value of device under test) r: 2, KQ, MQ (secondary parameter: Q value between devices under test)
3:he user shall press the frequency key and voltage key according to the test standard or use requirements of the tested part to select the corresponding measurement frequency and test voltage 50Hz, 60Hz, 100Hz, 120Hz,10 frequencies of 1kHz, 10kHz, 20kHz, 40KHz, 50KHz and 100kHz, and three voltages of 1V, 0.3V and 0.1V
The description in the manual doesn’t mean all contents in instrument. we reserves the rights to change the performance, function, inner structure, appearance,accessory and package without any inform! So please contact us by the address on the cover if you are confused by the difference between manual and instrument.
银飞 sells ZX8530 LCR Digital Meter

上一篇:综合电气安规测试仪PROFITEST/PRIME AC助力工厂工业4.0技术安全可靠运行
下一篇:Keithley6514Programmable Electrometer

专业选型请咨询大家工作人员

全国统一服务热线

0755-23964199
0755-23964499
0755-23964599
0755-86531914

(国内任一地区手机、座机均可拨打)

  • 公众号

  • 微博

  • 电子邮件

版权所有:金沙国际jsa 粤ICP备15021421号

金沙国际jsa供应商哪家好,金沙国际jsa品牌推荐,金沙国际jsa先容说明,Fluke功率分析仪器价格,数字压力表多少钱

收缩

银飞电子在线客服

  • 3183402039 点击这里给我发消息
  • 3176116521 点击这里给我发消息
  • 2753209529 点击这里给我发消息
  • 微信扫一扫 给我发消息
  • 0755-23964199
  • 0755-86531914
  • 在线留言
XML 地图 | Sitemap 地图