DRUCK DPI705E的附件选项

DRUCK DPI705E的附件选项Accessories,DPI705E / DPI705E-IS与以下配件兼容。除非另有说明,否则所有附件均与产品的本质安全或非本质安全版本兼容。建议用户购买原厂配套的适配器转接头。The DPI705E / DPI705E-IS is compatible with the following accessories. All accessories are compatible with either the Intrinsically Safe or Non-Intrinsically Safe versions of the product unless otherwise specified.
订购编号Part Code 产品描述Description
IO-RTD-M12CON Field wireable M12 connector 4-pin to fit RTD-INTERFACE
IO-RTD-M12EXT M12 male to female extension lead 2m (6.6ft) 4-wire
IO-RTD-PRB150 150mm length 6mm diameter PT100 steel RTD probe Class A
PM700E-CABLE Remote Sensor Extension Cable 2.9m (9.5ft)
IO705E-STRAP Magnetic Hanging Strap with Loop
IO705E-CASE Carry Case (for non-Intrinsically Safe DPI705E Unit)
IO705E-CASE-IS Carry Case (for Intrinsically Safe DPI705E-IS Unit)
IO-ADAPT-G1/4 G1/4 female pressure adaptor
IO-ADAPT-1/4NPT 1/4 NPT pressure adaptor
IO-ADAPT-1/8NPT 1/8 NPT pressure adaptor
IO-ADAPT-QF Quick-fit hose pressure adaptor
IOHOSE-NP1 Nylon hose, 1m (3.3ft) length, 20bar/300psi MWP
IOHOSE-NP2 Nylon hose, 2m (6.6ft) length, 20bar/300psi MWP
IO620-HOSE-P1 Pneumatic Hose, 1m (3.3ft) length, 100bar/1500psi MWP
IO620-HOSE-P2 Pneumatic Hose, 2m (6.6ft) length, 100bar/1500psi MWP
IO620-HOSE-H1 Hydraulic Hose, 1m (3.3ft) length, 1000bar/15000psi MWP
IO620-HOSE-H2 Hydraulic Hose, 2m (6.6ft) length, 1000bar/15000psi MWP
IO620-HOSE-P1-IS Pneumatic Hose for IS units, 1m (3.3ft) length, 100bar/1500psi MWP
IO620-HOSE-P2-IS Pneumatic Hose for IS units, 2m (6.6ft) length, 100bar/1500psi MWP
IO620-HOSE-H1-IS Hydraulic Hose for IS units, 1m (3.3ft) length, 1000bar/15000psi MWP
IO620-HOSE-H2-IS Hydraulic Hose for IS units, 2m (6.6ft) length, 1000bar/15000psi MWP
IO620-BSP 5 adaptors AMC Quick connect to G1/4F, G3/8F, G1/2F, G1/4M, G1/8M
IO620-NPT 5 adaptors AMC Quick connect to 1/4NPTF, 3/8NPTF, 1/2NPTF, 1/4NPTM, 1/8NPTM
IO620-MET 2 adaptors AMC Quick Connect to M14F & M20F
IO620-COMP 2-way comparator adaptor AMC Quick connect male to 2 X AMC quick connect Female – for comparing 2 gauges simultaneously.

DRUCK DPI705E压力指示仪的电池,有关兼容的电池类型,请参阅设备随附的快速入门和安全手册,Druck DPI705E 数字压力指示器 压力测试仪需要 4 节 AA/LR6 电池,安装如下图所示。使用一把小的Posidrive螺丝刀松开电池仓盖上的螺丝,并按照仪器背面显示的电池方向进行安装,如下图所示。
Batteries
For compatible battery types refer to Quick Start and Safety Manual provided with the unit .
The DPI705E instrument requires 4xAA/LR6 batteries, fitted as shown below. Use a small Posidrive screwdriver to loosen the screws in the battery compartment cover and fit as per the battery orientation shown on the back of the instrument as illustrated below:
DPI705E电池仓
深圳银飞企业DPI705E有现货
上一篇:DPI705E压力指示仪的螺纹接口规格
下一篇:Aeroflex RDX-7708气象雷达测试仪

专业选型请咨询大家工作人员

全国统一服务热线

0755-23964199
0755-23964499
0755-23964599
0755-86531914

(国内任一地区手机、座机均可拨打)

  • 公众号

  • 微博

  • 电子邮件

版权所有:金沙国际jsa 粤ICP备15021421号

金沙国际jsa供应商哪家好,金沙国际jsa品牌推荐,金沙国际jsa先容说明,Fluke功率分析仪器价格,数字压力表多少钱

收缩

银飞电子在线客服

  • 3183402039 点击这里给我发消息
  • 3176116521 点击这里给我发消息
  • 2753209529 点击这里给我发消息
  • 微信扫一扫 给我发消息
  • 0755-23964199
  • 0755-86531914
  • 在线留言
XML 地图 | Sitemap 地图